PLIZZZ HELP!!!!!!!!

Вопросы программирования на Free Pascal, использования компилятора и утилит.

Модератор: Модераторы

Сообщение mike » 14.06.2005 19:01:50

pozalujsta pomogite (u menja prisamoj ljuboj i prostoj proge freepascal pishet kogda ja kompiliruju (cant find UNIT SYSTEM ) 4e eto moglobi zna4itj :((
moj e-mail esli netrudno (xy_maniac@rambler.ru) ili (XY_PGIX@LINUXMAIL>ORG)
mike
 

Сообщение Guest » 14.06.2005 19:40:16

См. тему FPC.CFG у меня таже фишка (была)
Guest
 

Сообщение Иван Шихалев » 14.06.2005 19:52:26

Под root'ом тоже не может System найти?
Аватара пользователя
Иван Шихалев
энтузиаст
 
Сообщения: 1138
Зарегистрирован: 15.05.2006 11:26:13
Откуда: Екатеринбург

Сообщение Uniser » 14.06.2005 20:19:28

У меня такое было только под виндой
Uniser
новенький
 
Сообщения: 46
Зарегистрирован: 13.05.2005 23:13:57
Откуда: Украина, Полтава

Сообщение mike » 15.06.2005 09:12:14

ja daze pod root'om zahozu i to ze samoje pri kompilaciji pishet (can't find unit system)
mike
 

Сообщение Иван Шихалев » 15.06.2005 18:06:14

Значит, смотрим, что в fpc.cfg (или как он там под Linux) пишется в строках -Fuxxx
Аватара пользователя
Иван Шихалев
энтузиаст
 
Сообщения: 1138
Зарегистрирован: 15.05.2006 11:26:13
Откуда: Екатеринбург

Сообщение mike » 19.06.2005 15:21:22

{ VOT ETO U MENJA V FPC>CFG }
#
# Example fpc.cfg for Free Pascal Compiler
#

# ----------------------
# Defines (preprocessor)
# ----------------------

#
# nested #IFNDEF, #IFDEF, #ENDIF, #ELSE, #DEFINE, #UNDEF are allowed
#
# -d is the same as #DEFINE
# -u is the same as #UNDEF
#

#
# Some examples (for switches see below, and the -? helppages)
#
# Try compiling with the -dRELEASE or -dDEBUG on the commandline
#

# For a release compile with optimizes and strip debuginfo
#IFDEF RELEASE
-OG2p3
-Xs
#WRITE Compiling Release Version
#ENDIF

# For a debug version compile with debuginfo and all codegeneration checks on
#IFDEF DEBUG
-g
-Crtoi
#WRITE Compiling Debug Version
#ENDIF

# ----------------
# Parsing switches
# ----------------

# All assembler blocks are intel styled by default
#-Rintel

# All assembler blocks are AT&T styled by default
#-Ratt

# All assembler blocks are directly copied to asm
#-Rdirect

# Semantic checking
# -S2 switch some Delphi 2 extensions on
# -Sc supports operators like C (*=,+=,/= and -=)
# -Sd tries to be Delphi compatible
# -Se<x> compiler stops after the <x> errors (default is 1)
# -Sg allow LABEL and GOTO
# -Sh Use ansistrings
# -Si support C++ styled INLINE
# -Sm support macros like C (global)
# -So tries to be TP/BP 7.0 compatible
# -Sp tries to be gpc compatible
# -Ss constructor name must be init (destructor must be done)
# -St allow static keyword in objects
# Allow goto, inline, C-operators
-Sgic

# ---------------
# Code generation
# ---------------

# Uncomment the next line if you always want static/dynamic units by default
# (can be overruled with -CD, -CS at the commandline)
#-CS
#-CD

# Set the default heapsize to 8Mb
#-Ch8000000

# Set default codegeneration checks (iocheck, overflow, range, stack)
#-Ci
#-Co
#-Cr
#-Ct

# Optimizer switches
# -Og generate smaller code
# -OG generate faster code (default)
# -Or keep certain variables in registers (still BUGGY!!!)
# -Ou enable uncertain optimizations (see docs)
# -O1 level 1 optimizations (quick optimizations)
# -O2 level 2 optimizations (-O1 + slower optimizations)
# -O3 level 3 optimizations (same as -O2u)
# -Op target processor
# -Op1 set target processor to 386/486
# -Op2 set target processor to Pentium/PentiumMMX ™
# -Op3 set target processor to PPro/PII/c6x86/K6 ™

# Optimize always for Size and PentiumII
#-Og2p3


# -----------------------
# Set Filenames and Paths
# -----------------------

# Both slashes and backslashes are allowed in paths

# path to the messagefile, not necessary anymore but can be used to override
# the default language
#-Frc:\pp/msg/errore.msg
#-Frc:\pp/msg/errorn.msg
#-Frc:\pp/msg/errores.msg
#-Frc:\pp/msg/errord.msg
#-Frc:\pp/msg/errorr.msg

# path to the gcclib
#-Flc:\pp/lib

# searchpath for includefiles
# release them only if you know what you do
# because this could cause a rebuild of the runtime library
# if you tell them compiler/ide to build the project (FK)
#-Fic:\pp/source/rtl/inc;c:\pp/source/rtl/i386

# searchpath for objectfiles
#-Foc:\pp/source/rtl/inc;c:\pp/source/rtl/i386

# searchpath for units and other system dependent things
-Fuc:\pp/units/$FPCTARGET
-Fuc:\pp/units/$FPCTARGET/*
-Fuc:\pp/units/$FPCTARGET/rtl

# searchpath for libraries
#-Flc:\pp/lib
#-Fl/lib;/usr/lib

# searchpath for tools
-FDc:\pp/bin/$FPCTARGET

# -------------
# Linking
# -------------

# generate always debugging information for GDB (slows down the compiling
# process)
#-gl

# always pass an option to the linker
#-k-s

# Always strip debuginfo from the executable
-Xs


# -------------
# Miscellaneous
# -------------

# Write always a nice FPC logo ;)
-l

# Verbosity
# e : Show errors (default) d : Show debug info
# w : Show warnings u : Show used files
# n : Show notes t : Show tried files
# h : Show hints m : Show defined macros
# i : Show general info p : Show compiled procedures
# l : Show linenumbers c : Show conditionals
# a : Show everything 0 : Show nothing (except errors)

# Display Info, Warnings, Notes and Hints
-viwn
# If you don't want so much verbosity use
#-vw
mike
 

Сообщение Иван Шихалев » 19.06.2005 16:34:03

Вот это:
Код: Выделить всё
-Fuc:\pp/units/$FPCTARGET
-Fuc:\pp/units/$FPCTARGET/*
-Fuc:\pp/units/$FPCTARGET/rtl

явный косяк: насколько я помню в Linux нет дисков, соответственно и диска C: тоже…
Аватара пользователя
Иван Шихалев
энтузиаст
 
Сообщения: 1138
Зарегистрирован: 15.05.2006 11:26:13
Откуда: Екатеринбург

Сообщение Иван Шихалев » 19.06.2005 21:21:58

В дополнение, как модератор скажу:
<span style='color:red'>Тема в форуме должна иметь осмысленный заголовок. В дальнейшем темы с заголовками, как этот, будут удаляться/закрываться.</span>
Аватара пользователя
Иван Шихалев
энтузиаст
 
Сообщения: 1138
Зарегистрирован: 15.05.2006 11:26:13
Откуда: Екатеринбург

Сообщение Romtek » 19.06.2005 21:26:53

Вот пример моего /mnt/hda7/etc/fpc.cfg (LINUX) :
Код: Выделить всё
#
# Example fpc.cfg for Free Pascal Compiler
#

# ----------------------
# Defines (preprocessor)
# ----------------------

#
# nested #IFNDEF, #IFDEF, #ENDIF, #ELSE, #DEFINE, #UNDEF are allowed
#
# -d is the same as #DEFINE
# -u is the same as #UNDEF
#

#
# Some examples (for switches see below, and the -? helppages)
#
# Try compiling with the -dRELEASE or -dDEBUG on the commandline
#

# For a release compile with optimizes and strip debuginfo
#IFDEF RELEASE
 -OG2p3
 -Xs
 #WRITE Compiling Release Version
#ENDIF

# For a debug version compile with debuginfo and all codegeneration checks on
#IFDEF DEBUG
 -g
 -Crtoi
 #WRITE Compiling Debug Version
#ENDIF

# ----------------
# Parsing switches
# ----------------

# All assembler blocks are intel styled by default
#-Rintel

# All assembler blocks are AT&T styled by default
#-Ratt

# Semantic checking
# -S2   switch some Delphi 2 extension on
# -Sc   supports operators like C (*=,+=,/= and -=)
# -Sg   allows LABEL and GOTO
# -Si   support C++ stlyed INLINE
# -Sm   support macros like C (global)
# -So   tries to be TP/BP 7.0 compatible
# -Ss   constructor name must be init (destructor must be done)
# -St   allows static keyword in objects

# Allow goto, inline, C-operators, C-vars
-Sgic

# ---------------
# Code generation
# ---------------

# Uncomment the next line if you always want static/dynamic units by default
# (can be overruled with -CD, -CS at the commandline)
#-CS
#-CD

# Set the default heapsize to 8Mb
#-Ch8000000

# Set default codegeneration checks (iocheck, overflow, range, stack)
#-Ci
#-Co
#-Cr
#-Ct

# Optimizer switches
# -Og        generate smaller code
# -OG        generate faster code (default)
# -Or        keep certain variables in registers (still BUGGY!!!)
# -Ou        enable uncertain optimizations (see docs)
# -O1        level 1 optimizations (quick optimizations)
# -O2        level 2 optimizations (-O1 + slower optimizations)
# -O3        level 3 optimizations (same as -O2u)
# -Op        target processor
#     -Op1  set target processor to 386/486
#     -Op2  set target processor to Pentium/PentiumMMX (tm)
#     -Op3  set target processor to PPro/PII/c6x86/K6 (tm)

# Optimize always for Size and PII
#-OG2p3


# -----------------------
# Set Filenames and Paths
# -----------------------

# Slashes are also allowed under dos

# path to the messagefile, not necessary anymore but can be used to override
# the default language
#-Fr/usr/local/lib/fpc/1.9.6/msg/errore.msg
#-Fr/usr/local/lib/fpc/1.9.6/msg/errorn.msg

# searchpath for includefiles
#-Fi/pp/inc;/pp/rtl/inc

# searchpath for units and other system dependent things
-Fu/usr/local/lib/fpc/1.9.6/units/$fpctarget
-Fu/usr/local/lib/fpc/1.9.6/units/$fpctarget/*
-Fu/usr/local/lib/fpc/1.9.6/units/$fpctarget/rtl
#-Fu~/fpc/packages/base/*/units/;~/fpc/fcll/units/;~/fpc/rtl/units/

# searchpath for libraries
-Fl/usr/lib/gcc-lib/i586-alt-linux/3.2.3
#-Fl/pp/lib
#-Fl/lib;/usr/lib


# -------------
# Linking
# -------------

# generate always debugging information for GDB (slows down the compiling
# process)
#-g

# always pass an option to the linker
#-k-s

# Always strip debuginfo from the executable
-Xs


# -------------
# Miscellaneous
# -------------

# Write always a nice FPC logo;)
-l

# Verbosity
# e : Show errors (default)       d : Show debug info
# w : Show warnings               u : Show used files
# n : Show notes                  t : Show tried files
# h : Show hints                  m : Show defined macros
# i : Show general info           p : Show compiled procedures
# l : Show linenumbers            c : Show conditionals
# a : Show everything             0 : Show nothing (except errors)

# Display Info, Warnings, Notes and Hints
-viwn
# If you don't want so much verbosity use
#-vw

#
# That's all folks
#
Аватара пользователя
Romtek
постоялец
 
Сообщения: 190
Зарегистрирован: 22.05.2005 12:29:35
Откуда: Рамат Ган

Сообщение mike » 19.06.2005 23:17:08

<span style='color:red'>boljshoje,ogromnoje vam spasibo za pomoshj :) :) :) </span> [glow=][/glow]
mike
 


Вернуться в Free Pascal Compiler

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 23

Рейтинг@Mail.ru